Recording Service Tweaker
Inhaltsverzeichnis
Allgemein[Bearbeiten]
In der Service.xml_Tweaks.txt sind einige Optionen verzeichnet, die sich nur direkt in der Service.xml ändern lassen.
Achtung es muss die richtige Service.xml geändert werden und zwar die im Konfigurationsverzeichnis im Unterordner config.
Vor Änderungen an der Service.xml diese vorher immer sichern und den Recording Service und das Service Konfigurationsprogramm beenden!
Die Angaben in der Service.xml_Tweaks.txt sind folgendermaßen zu verstehen:
Section: der Bereich in den der Befehl gehört - z.B. für Section: UPnP gehört der Eintrag unter
<section name="UPnP">
Falls keine passende Section vorhanden ist kann einfach eine neue angelegt werden.
<section name="UPnP">
</section>
Achtung: aber nicht innerhalb einer anderen Section! Jede Section darf nur einmal in der Datei vorhanden sein.
Value ist der Name des Eintrags - z.B. UseMP3
<entry name="'''UseMP3'''">'''0'''</entry>
unter Accepted stehen die möglichen Werte
und Default ist die Standardeinstellung die der DVBViewer verwendet, wenn kein Eintrag vorhanden ist.
Tweak Einträge[Bearbeiten]
UseMP3[Bearbeiten]
- Value: UseMP3
- Section: UPnP
- Accepted: 0 (false), 1 (True)
- Default: 0
- Description: You need for this Tweak: FFMPEG. Extract the ffmpeg.exe into the service program folder. UPnP Streaming of live DVBradio will be streamed as mp3 (192 kbit/44100Hz).
MP3Sampling[Bearbeiten]
- Value: MP3Sampling
- Section: UPnP
- Accepted: Valid MP3 Samplingrate (44100/48000 etc)
- Default: 44100
- Description: The Samplingrate of the MP3 conversion.
MP3Rate[Bearbeiten]
- Value: MP3Rate
- Section: UPnP
- Accepted: Valid MP3 Bitrate (128/160/192/320) etc.
- Default: 320
- Description: The Bitrate of the MP3 conversion.
UseMPG[Bearbeiten]
- Value: UseMPG
- Section: UPnP
- Accepted: 0 (false), 1 (True)
- Default: 0
- Description: On the fly MPEG2 conversion of LiveTV possible ( not for H264 channels!). Can be helpful for UPnP devices which can't handle TS.
Reset[Bearbeiten]
- Value: Reset
- Section: Recording
- Accepted: 0 (false), 1 (True)
- Default: 0
- Description: If set to 1 the device of a starting recording gets reset, if it meets the following: 1)It is not in use. 2) Reset is activated in the hardware options.
SplitAC3Add[Bearbeiten]
- Value: SplitAC3Add
- Section: Recording
- Accepted: 0 (false), 1 (True)
- Default: 0
- Description: Some broadcasters activate the AC3 Stream only if necessary, this could cause problems with editing programs (projectx etc) which did not detect the AC3 stream, if you started the TS-recording early (because of the normally used pre roll).
Now there is a tweak to force a split of the TS-recording if a new AC3 stream is detected at last 15 seconds after the start of the recording.
MaxBufferSize[Bearbeiten]
- Value: MaxBufferSize
- Section: Recorder
- Accepted: 1..100
- Default: 10% of physical memory or max. 100 MB.
- Description: Defines the maximum Size of the recording file write buffer. Normally this size is never reached.
servername[Bearbeiten]
- Value: servername
- Section: UPnP
- Accepted: Allowed xml strings
- Default: DVBViewer Mediaserver
- Description: The name of the DVBViewer mediaserver.
DVBEPGAsAnsi[Bearbeiten]
- Value: DVBEPGAsAnsi
- Section: Service
- Accepted: 0 (false), 1 (True)
- Default 0
- Description: Determinates if DVB EPG Parser ignores the language settings in the EIT and converts the text from the local charset to UTF-8. May help if you get strange chars in the EPG.